• Strength Training 101: How much weight should I be lifting? (compliments of nerdfitness.com)

    How much do you think Hefty Smurf is lifting here?

    How much weight did he warm up with?

    How does he know when to start lifting heavier?

    When many people first get into weightlifting, the process of figuring out what weight to start with can be daunting and even cause some to not bother starting at all.

    This is another article from Staci Ardison, strength training enthusiast and now the lead female trainer in our 1-on-1 Online Coaching Program!

    We often hear questions like:

    • What weight should I start with?
    • How much should I be lifting?
    • If my program wants me to be doing 5 sets of 5 at 80% of my 1 rep max, how do I figure out my 1 rep max?
    • What if it doesn’t give any percentages at all?
    • How do I know what weights I should be doing?

    If you find yourself with a billion strength training questions, or you’re overwhelmed at all of this and not sure how to get stronger…you’re in good company!

    It can be scary enough to keep MOST people from starting, which is actually why we created our 1-on-1 Coaching Program.

    Our coach gets to know you, builds a program based on your experience and goals, will check your form on each movement (via video), and keep you accountable and on track!


    With that out of the way, let’s jump into the nitty gritty of “how much weight should I lift?”


    Bodyweight First                        WeightPlate

    Stop! Let’s back up a second.

    Before ever trying to figure out how much weight you can lift, make sure you know how to do the movement, as flawless as possible, without any weight at all.


    Because if you can’t do a movement correctly without weight, how can you expect to do it right WITH weight?  Think about it – if you can’t walk up a flight of stairs normally, would you expect to be able to walk up the flight of stairs carrying bags of groceries?  No – you would only hurt yourself.

    So our first step is to learn each movement without any bars, dumbbells, or added weight.

    “But!” you say, “how on earth do I do a deadlift or a press without any weight?  And I know I can do a bodyweight squat, but isn’t it completely different with a bar on your back?”

    Easy – grab either a broomstick (be careful for splinters!), mop handle, or PVC pipe (I use a 1.25” PVC cut in half) and pretend it’s a bar.

    If you’re trying to mimic a dumbbell movement, either grab a short dowel, PVC, or just hold your hands in a fist as if you were holding on to something.

    While it’s not the exact same as holding actual weight, it will allow you to practice getting into the correct positions.

    One great reason to start here is that you can do it in your own home, without other people around you (so you’ll be less nervous).  Also, you can video tape yourself pretty easily (I use my computer’s web cam, or my phone camera and a little tripod). Here’s a video of me doing this back when I started lifting in 2011, when I was trying to figure out how to deadlift, to get an idea of what I’m talking about:

    (Now, I’m the Nerd Fitness Deadlift Champion, from our recent virtual powerlifting meet that we hold every 4 months :))

    If you are interested in nerding out about learning perfect form for each movement, we HIGHLY recommend you pick up Starting Strength, widely considered to be the Bible of Barbell Training.

    Once you feel good about your form, you can see if you can “pass the bar.” (guaranteed to be the nicest lawyer joke you’ll ever read on Nerd Fitness, by the way).

    What’s that? You want a full Bodyweight Workout Program that you can follow along with at home that will help get you prepped to start strength training? I got you covered, because I’m a nice guy (my mom says so, anyway). You can download the worksheet to follow along here when you sign up in the box below:


    Starting to Add Weight      barbell 10 plate

    If you’re looking to start on a beginner program, such as the workouts in The Nerd Fitness Academy or Starting Strength, the first step is to look at the instructed number of reps in each set.

    A few common rep ranges for beginner programs are 5 sets of 5, 3 sets of 8, or 3 sets of 10. For this example, lets say your program has you doing 5 sets of 5 on a particular lift.

    • After a proper warm up routine, start with the empty bar again, and complete the prescribed number of reps (for this, it would be 5).

    “But I thought you said we could add weight this time?” you might be thinking.

    You can – but no matter how heavy you are going, always start with just the bar to warm up for EACH exercise.  If you watch the best lifters in your gym, you will notice they all warm up with “just the bar” to start, often for multiple sets! This helps get your body warm, primes your nervous systems and all of your muscles for that movement, and gets you ready to lift heavier weight.

    As a beginner, this is especially important to ingrain proper technique.

    • Next, add some weight to the bar.  Depending on how heavy the bar felt, start by adding anywhere from 2.5lbs to 10lbs to each side.  Do another set of 5 reps at this weight.

    (Note: If you’re doing dumbbell training, instead of adding weight to the bar, increase the weight of the dumbbell.  Start with 5lb dumbbells, then 10lbs dummbells, for example)

    • If you were able to complete those reps both without losing form and without the speed of the bar slowing, add more weight to the bar.  Base the amount of new weight off how it felt – if the last set felt really light, add 10’s, if it felt heavy, add 2.5’s or 5’s.
    • Continue to do this until your form starts to break down or the speed of the lift gets slower on any of your reps. The weight you used right before your form started to break down is your starting weight on which you will base all future workouts!

    If it is a lower number than you expect, that would be the right number!  Don’t try to be a hero your first workout, it is better to start out too light than too heavy.  Remember – we’re trying to get solid, productive sets in, not find our max, so we want all of the reps to be fast and with as perfect form as our body allows.

    And since during this process you’re testing out heavier weights for the first time, never be afraid to have a spotter, or to use pins to ensure your safety!

    What about after the first few workouts?     mismatched barbell

    Once you find your starting weight, you’ll want to start using something called “progressive overload.” This sounds a lot fancier than it really is.

    Simply put, progressive overload means gradually increasing the stress put on your body during training.

    In other words, we need to increase something, regularly. Usually this means the amount of weight we lift. And for beginners, that can often happen in every workout.  After every workout our body heals, and if you’re getting proper sleep and nutrition, it heals back stronger than it was before.

    If you do 5 sets of 5 at 100 lbs every single workout for months, are you getting stronger?  Most likely not – your body is becoming more efficient at lifting 5×5 at 100 lbs, burning less calories and using less processes to make that movement happen.

    So, how much weight do you add when you’re ready to increase your workouts?

    That depends on how difficult was the sets last time. This is where great note-taking comes in (I’m a huge fan of a simple notebook, or Evernote docs on my phone). Be sure to document not only how much you lifted and for how many reps, but also how your lifts went so next time you know what you need to be doing.  Did you go to failure on your last set? Did your form break down on any of the reps?

    If you failed to complete an of your reps or your form started to break down, it might not be a bad idea to do the same weight again, and focus boosting your form and technique of each rep.

    Remember, if you are doing the same workout as last time, but each rep is more solid and with better form than before, you’re still doing better than you were last workout – you’re still leveling up. You don’t necessarily have to go up in weight every workout to see gains. Less rest between sets, more control and better form, and more repetitions all mean you are getting stronger.

    If you were able to get through all of your sets with great form, and without the bar slowing down, consider adding more.  It’s not unheard of for beginners to add 10-20lbs a week to some lifts (especially squats and deadlifts), though don’t get discouraged if you’re only adding 2.5 or 5!

    The BEST THING YOU CAN DO is to slowly add weight and progress consistently rather than progress very quickly then hit a plateau. Each week, as you add a little bit of weight, you are building strength, confidence, and momentum.

    (Note: For some lifts, especially the overhead press or bench press, adding just 5 lbs may be too much to go up per workout.  I personally have a set of 1.25lb plates that I bring with me to the gym so that I can still progress regularly.)

    If you started out too light (like we recommend!) you can easily add more weight each workout as your body gets used to the movements and as you get better at lifting.

    Remember that there will be days when you can’t add any weight.  So many things affect how your lifts are going to feel – from a baby crying all night, to lots of stress at the office, to drinking too much at the big game.

    It’s important to listen to your body over listening to some number telling you what you should be lifting. You want to be making progress every time you walk into the gym, and that means having a specific plan to follow.

    Our Strength Training 101: Everything You Need to Know covers all of this stuff and will (virtually) hold your hand through the process! Grab your free guide when you sign up in the box below:


    What about finding our 1 rep maxes? I want to know how much I can lift!

    corey1rm2Our very own “Gainsdalf the Whey” at our recent Dallas meetup

    It’s really fun to find the maximum amount of weight you can do for one repetition (one rep max) every once in a while.

    However, as a beginner who is just starting out, it’s better that you start with getting the movement right and adding weight slowly before trying to find a one rep max.  I would suggest you follow a program for at least six weeks before even attempting “a heavy single”.


    Even if your form is as good as you can get it now, you will get far better, learning how to make tweaks and corrections as you go.  When you first start out, you’re still getting everything down, so your one rep max won’t be a “true” one rep max.

    Plus, when you train, you’re training everything in your body.  Some things, like muscles and bones, get stronger, while others, like your nervous system, get more efficient.  The more you do something, the better you get at it.  And in the beginning you’ll get better very quickly.

    As a beginner, it just isn’t safe to attempt a 1 repetition maximum when you’re learning the movement. Even if you can do it with proper form with lighter weights, as soon as the weight gets close to your 1 rep max your form will start to break down, and you are more likely to hurt yourself.

    When your form starts to break down, you need to have the experience behind you to finish (or bail out of) the lift safely.

    If you watch any weightlifting or powerlifting competition, sometimes the lifts are not the prettiest lifts you’ve ever seen.  However, the lifters are experienced enough to handle this, and know how to bail if something goes wrong.  As a beginner, you are not.

    So what is a respectable amount to be lifting?    farmer's walk

    The simple answer?  The weight that’s right for you. You are not competing against the guy next to you; you’re competing against the YOU from last week (like racing your ghost in Mario Kart).

    As far as what you can strive for, there’s no easy calculation or formula. While some people have put out strength standards, it’s truly up to your body, your body type, your background as an athlete, your genetics, and many other factors.

    You should be lifting the amount that’s right for you today. In your next workout you should be trying to lift more (even if you can’t do more weight, try doing one more rep, or with less rest between sets) than you did last time.

    That’s it.  As a part of this journey, I want you to completely forget about strength standards and forget about everyone around you.  I don’t care if the guy (or girl) next to you is squatting 500 lbs for sets of 10.  If you’re squatting 50 lbs, and that’s the weight that is challenging for you, then that’s the weight you should be lifting.

    Never try to outlift the person next to you. Never adjust the weight to impress someone. No one’s judging you based on the weight on the bar, and if they are, they aren’t worth your time or energy.

    To recap:

    • The strongest lifters I know warm up with “just” the bar.
    • The strongest lifters I know focus on getting their reps in, and aren’t ashamed that they’re lifting less than the guy next to them.
    • The strongest lifters I know take time to get things right, even if that means lifting less weight than they know they “can” do.
    • The strongest lifters I know started off doing a beginners program just like you.

    So remember – start slow, add weight slowly, and stay conservative.

    It’s amazing how much even adding just 5 lbs (2kg) a week adds up to!  It’s far better to play it safe in the beginning than to find yourself injured and frustrated before you have a chance to progress.

    Hopefully this article EXCITED you about strength training, but I can see how this stuff can be really scary and overwhelming too.